It looks like you're new here. If you want to get involved, click one of these buttons!
What is the process for putting the Ubuntu image onto the eMMC card?
The support page just says coming soon.
probably is a better way , what I did was with Ubuntu on sd card, installed Gnome on
on Ubuntu , sudo apt-get install gnome, for it's utility's but didn't use it's desktop
put unzipped img file on usb thumb drive, in programs search for disks a utility gnome
added, use Disks utility to restore img file to eMMC drive, after done unplug sd should
boot from eMMC, you may need to install Dparted 1st to partition /remove android from
I use FactoryTool-v1.43e to flash the eMMC ported directly on the board.
Recommend using the images and flashing tools provided on Firefly website here
They are developing the images for the RK3328 CC. The website has the flashtools that you need too.
their android version for this sbc is just hot off the press (April18). and works really well.
using the how-to, installed the rkusb drivers, used the android tool which is
rkdev tool for nonandroid , it showed how to change it to English so could use it
connected board to PC in recovery mode, tool saw it in maskrom mode (empty emmc)
flashed it to ubuntu16.04 20180324 build it worked! , so glad to have PC finaly see it