ROC-RK3328-CC-ubuntu18.04

Hello,
so I cannot get to the GUI when I login. I get sent to the CLI where I login with firefly:firefly and I cannot get to the desktop. It worked yesterday then I had to start over and re-imaged a new SD card. Any help would be greatly appreciated.

Comments

  • Not sure if this will help - try the command at the console: startx

  • Nope, I just get that it failed to create a file via template and that it is a read-only file system

  • edited June 12

    I got that too.
    Your device may be overheating. Check your heatsink and or remove the enclosure when you first install the image.
    Also, before you re-flash your image, you can try the command # sudo e2fsck -y /dev/ where, is the name of your block device.

    Mine was : firefly@firefly:~$ sudo e2fsck -y /dev/mmcblk0p5
    the sudo fdisk -l command should be able to find your block device if the error message doesn't tell you, or you can list the boot messages $ sudo cat /var/log/syslog

    That seemed to fix my corruption. ext4 doesn't have any crc checking for files. I need to try convert over to the BTRFS file system but, i'm still learning. Not sure how far I will get.
    Just try the above first.

    If none of that helps, re-image the flash unit and try again from the start. Just make sure the CPU is not overheating when booting and the power supply is allowing enough power.

Sign In or Register to comment.